1. The iron bar spacing of the chicken cage is very important. The most reasonable spacing is 2.5cm * 5cm. Some farmers may think that the larger the size of the chicken, the larger the spacing, the wrong idea. The conditional breeders can also lay a kind of plastic net at the bottom of the broiler cage, which is consistent with the cage eye, which can not only buffer the strength of the eggs touching the net to reduce the breaking rate, but also prevent some diseases.
2. The design angle of the egg rolling at the bottom of the chicken cage shall be accurate. The egg cannot be rolled out in time at a small angle. If it is trampled by the chicken, the egg may be broken at a large angle. The general angle shall be kept at seven to eight degrees.
3. Pay attention to the connection between the chicken cage and the bottom of the cage. You must be reminded that there are farmers here. You can't leave a big gap here, because there are more eggs on the ground here. You must pay attention to this detail when you buy the cage.
4. Material selection of chicken coop. The selection of materials for making chicken cages is very particular. It is necessary to select suitable materials with toughness. The diameter of wire at the bottom of the cage is about 2mm, and the egg breaking rate is the smallest. The larger the diameter of wire, the easier it is to cause egg breaking.
The above four points are the key points that the breeders should pay attention to when choosing the cage equipment summarized by Pratt & Whitney. I hope they can help the breeders. In addition, the breeders should pay attention to the maintenance and cleaning of the cage in order to ensure that the cage equipment can work for the breeders all the year round. Thank you for your attention Animal husbandry fan FRP fan http://www8006d.com/
Copyright 2017 Qingdao Puhui Agriculture and Animal Husbandry Science and Technology Co., Ltd. All Rights Reserved